Updating BIOS Prosedures
1. Download an updated ASUS BIOS file from the Internet (WWW or FTP)
(see ASUS CONTACT INFORMATION on User Ma for details) and save to the disk you created earlier.
2. Boot from the disk you created earlier.
3. At the A:\ prompt, type AFLASH and then press.
4. At the Main Menu, type 2 and then press.
The Update BIOS Including Boot Block and ESCD screen appears.
5. Type the filename of your new BIOS and the path, for example, A:\XXX-XX.XXX, and then press.
NOTE: To cancel this operation, press.
6. When prompted to confirm the BIOS update, press Y to start the update.
7. The utility starts to program the new BIOS information into the flash ROM. The boot block will be updated automatically only when necessary. This will minimize the chance that a failed update will prevent your system from booting up. When the programming is finished, Flashed Successfully will be displayed.
NOTE: When you see the message "Boot Block is different" you may still press to update the BIOS. Yet if the update fails, your system will run a greater risk of boot failure depending on whether the boot block is damaged or not.
8. Follow the onscreen instructions to continue.
(see ASUS CONTACT INFORMATION on User Ma for details) and save to the disk you created earlier.
2. Boot from the disk you created earlier.
3. At the A:\ prompt, type AFLASH and then press
4. At the Main Menu, type 2 and then press
The Update BIOS Including Boot Block and ESCD screen appears.
5. Type the filename of your new BIOS and the path, for example, A:\XXX-XX.XXX, and then press
NOTE: To cancel this operation, press
6. When prompted to confirm the BIOS update, press Y to start the update.
7. The utility starts to program the new BIOS information into the flash ROM. The boot block will be updated automatically only when necessary. This will minimize the chance that a failed update will prevent your system from booting up. When the programming is finished, Flashed Successfully will be displayed.
NOTE: When you see the message "Boot Block is different" you may still press
8. Follow the onscreen instructions to continue.
Posted by:
Riko
2
comments
Categories:
System